Tower tuned mass dampers
Pendulum dampers
Pendulum dampers for first tower eigenmode
Wind turbines and other slender buildings are prone to low-frequency vibrations with large amplitudes. The excitation forces are caused by Karman vortices, waves or other harmonic and stochastic phenomena during the operation of wind turbines. The resulting vibrations are dominated by the first and second tower eigenmode. ESM provides different types of tuned mass dampers to prevent these harmonic vibrations in towers.
For the first tower eigenmode, pendulum-based tuned mass dampers are the easiest way of eliminating undesired vibrations. The mass, frequency and damping of the mechanical pendulum are designed for each specific tower application. There is also the option of tuning the TMD on-site to the specific tower frequency. The properties of different damping technologies are not affected by temperature changes. The frequency range of first tower eigenmodes is 0.15–0.3Hz.
Properties
- Low maintenance; special designs available for long-term use
- Elastic end stops prevent the TMD mass from colliding against the tower wall with extreme force
- Tunable on-site using extra spring at the lower end
- Can be installed with the tower horizontal
- Suitable for retrofitting
Applications
- Reduction of tower vibrations in wind turbines and other slender buildings
- Wind turbines, civil engineering
Pendulum dampers for the second tower eigenmode
ESM pendulum dampers can also be used to prevent undesired vibrations of the second tower eigenmode (1–3Hz).
ESM uses pendulum tuned mass dampers that are compact and can easily be connected to the tower. The TMD system includes a damping device that uses elastomer damping or other damping principles unaffected by temperature. Damping can be incorporated into the pendulum joint by means of elastomer elements.
Properties
- Frequency and damping easily tuned without altering suspension length
- Low maintenance; special designs available for long-term use
- Can be installed with the tower horizontal
- Suitable for retrofitting
Applications
- Reduction of second tower eigenmode
- Wind turbines, civil engineering
Tuned mass dampers for the installation of wind turbines
When wind turbines are being erected, the damping effect of the blades is missing. Accordingly, wind and wave excitation may cause extreme vibrations in the installed tower that need to be prevented.
Installation TMDs made by ESM reduce the vibration levels for the different installation phases of the towerand allow more flexibility when planning the erection of wind turbines. ESM installation TMDs are self-supporting, separate structures with damping unaffected by temperature.
Properties
- No energy supply necessary
- Multiple use at various sites and for different tower sizes
- Optional: TMDs can be tuned to different installation phases
Applications
- Reduction of tower vibrations during the erection of wind turbines
- Wind turbines, civil engineering
Rolling mass absorbers
ESM has developed a type of tuned mass absorber (RMA) that can reduce tower vibrations with relatively low mass. It consists of a mass, a flywheel, a damping device, and a rail on which the mass moves. Due to its compact design, the RMA can be installed at very high positions in the wind turbine and even retrofitted in the nacelle. For the first tower eigenmode, ideally the RMA should be positioned inside or on top of the nacelle. Good positions can also be found within the tower. Depending on the tower excitation and the available space, one or two RMAs per wind turbine are required. The frequency and damping of the RMA can easily be tuned on-site.
Properties
- Frequency and damping can easily be tuned on-site
- Frequencies can be adjusted to the tower frequencies
- Optionally available with electrical fixation brake
- Suitable for retrofitting
Applications
- Reduction of first tower mode vibrations
- Wind turbines, civil engineering
Impact dampers
ESM impact dampers are robust and maintenance-free. The impact system is beneficial for low space requirements and a good cost-performance ratio.
If critical oscillation amplitudes are exceeded the mass of the impact damper starts counteracting the critical oscillation movement by impact force transmission.
ESM impact dampers are suitable for many applications. They are used to effectively stop the excessive excitation of the second tower eigenmode in wind turbines for example. The impact damper can be installed when the tower is lying on the ground. Additional internals in the tower are not necessary as the impact damper can be installed directly at the tower flange.
Properties
- Maintenance free
- Low space requirements
- Good cost-performance ratio
- Can be installed while tower is lying on the ground
- Suitable for retrofitting
Applications
- Reduction of tower vibrations in wind turbines and other slender buildings
- Wind turbines, civil engineering, marine engineering